Sql Error #5078, Severity 16

Sql Error Number:5078
Severity: 16

Description: Cannot alter database options for "%ls" because it is READONLY, OFFLINE, or marked SUSPECT.

Possibly related links:

Errors 5000 - 5999
... to the state or options of database '%.*ls' cannot be made at ... Cannot alter collation for database '%ls' because it is READONLY, OFFLINE, or marked SUSPECT. ...

Errors 1000 - 1999
... for database '%ls' because it is marked as a mirror database, which cannot be recovered. ... cannot be enabled because the "%.*ls" database is read-only on ...

Errors 1 - 999
Database '%.*ls' cannot be opened because it is offline. 943. 14. No ... Warning: Database "%.*ls" was marked suspect because of actions taken during upgrade. ...

Errors 15000 - 15999
The "user options" config value (%d) was rejected because it would set ... Cannot execute '%ls' because the database is in read-only access mode. 15645. 16. No ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5077, Severity 16

Sql Error Number:5077
Severity: 16

Description: Cannot change the state of non-data files or files in the primary filegroup.

Possibly related links:

RESTORE (Transact-SQL)
For online restore of a non-primary filegroup, the database can stay in use ... In addition, RESTORE can restore full-text files only, as well as with database data. ...

ALTER DATABASE (Transact-SQL)
Data files should not be put on compressed file systems ... The primary filegroup cannot be ... You cannot change the state of this option when the ...

Glossary
... a change in phonetic value compared to the unmarked state. dialog ... the data in a database or in a subset of the files or filegroups of a database. ...

Glossary of Terms
... secondary data files to hold data that does not fit on the primary data file. data flow ... A state in which all the data values stored in the database are ...

ALTER DATABASE
... change the database name, filegroup names, and the logical names of data files and log files. ... the requested database state or option change cannot ...

ALTER DATABASE
... change the database name, filegroup names, and the logical names of data files and log files. ... the requested database state or option change cannot ...

Breaking Changes to Database Engine Features in SQL Server 2005
... is created and maintained in the PRIMARY filegroup of each user database for ... space is required for the tempdb data and log files in SQL Server 2005. ...

RESTORE Arguments (Transact-SQL)
If the backup contains the primary filegroup and a partial restore is being performed. ... the database with KEEP_CDC will not create the Change Data Capture ...

RESTORE (Transact-SQL)
For online restore of a non-primary filegroup, the database can stay in use ... In addition, RESTORE can restore full-text files only as well as with database data. ...

Errors 4000 - 4999
... at the beginning of the log are pending replication or Change Data Capture. ... Point-in-time recovery is not possible unless the primary filegroup is part of ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5076, Severity 10

Sql Error Number:5076
Severity: 10

Description: Warning: Changing default collation for database '%.*ls', which is used in replication. All replication databases should have the same default collation.

Possibly related links:

Errors 5000 - 5999
Warning: Changing default collation for database '%.*ls', which is used in replication. ... is recommend that all replication database have the same default ...

Errors 15000 - 15999
The device is a RAM disk and cannot be used as a default device. 15140. 16 ... text index for table '%ls' cannot be populated because the database is in single ...

Errors 15000 - 15999
The device is a RAM disk and cannot be used as a default device. 15140. 16 ... text index for table '%ls' cannot be populated because the database is in single ...

Errors 21000 -21999
Pull subscriptions cannot be created in the same database as the publication. 21127 ... If the database is used for replication, run sp_vupgrade_replication in the ...

Errors 1 - 999
Changing databases is not ... conflicting for the same keep slot in table '%.*ls'. 654. 20 ... Warning: Index '%ls' on '%ls' in database '%ls' may be ...

Errors 4000 - 4999
... database is being used instead. 4062. 11. No. Cannot open user default ... column '%.*ls' does not have the same collation in tables '%.*ls' and '%.*ls' ...

Errors 1 - 999
Changing database context is not allowed when populating the resource database. 587 ... Warning: The default or fixed value on XML element or attribute "%.*ls" in ...

Errors 8000 - 8999
The KTM RM for this database, %ls, failed to start: %d. 8535. 16. Yes ... Object '%.*ls' is specified in the TABLE HINT clause, but is not used in the ...

Errors 15000 - 15999
... rename the table because it is published for replication. 15053. 16 ... Cannot execute '%ls' because the database is in read-only access mode. 15645. 16. No ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5075, Severity 16

Sql Error Number:5075
Severity: 16

Description: The %S_MSG '%.*ls' is dependent on %S_MSG.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' cannot be removed because it is not empty. 5043. 16 ... The %S_MSG '%.*ls' is dependent on %S_MSG. 5076. 10 ...

Error 4929
Cannot alter the %S_MSG '%.*ls' because it is being published for replication. Explanation ... The following procedure is dependent on SQL Server system tables. ...

Errors 10000 - 10999
Cannot create %S_MSG on view "%.*ls" because it uses the OPENXML rowset provider. ... ls' on view '%.*ls' because the view is dependent on base table '%.*ls' whose ...

Errors 1000 - 1999
Cannot create %S_MSG on view '%.*ls' because the view is not schema bound. 1940. 16 ... ls' is non-deterministic because it is dependent on the operating system. ...

Errors 6000 - 6999
... collection DDL operations it is dependent on from the batch, and ... Specified collection '%.*ls' cannot be dropped because it is used by %S_MSG '%ls' ...

Errors 15000 - 15999
Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or ... owner of Assembly '%.*ls' since dependent assembly '%.*ls' is not owned by the new owner. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5074, Severity 16

Sql Error Number:5074
Severity: 16

Description: The %S_MSG '%.*ls' is dependent on %S_MSG '%.*ls'.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' cannot be removed because it is not empty. 5043. 16 ... The %S_MSG '%.*ls' is dependent on %S_MSG. 5076. 10 ...

Error 4929
Cannot alter the %S_MSG '%.*ls' because it is being published for replication. Explanation ... The following procedure is dependent on SQL Server system tables. ...

Errors 6000 - 6999
... collection DDL operations it is dependent on from the batch, and ... Specified collection '%.*ls' cannot be dropped because it is used by %S_MSG '%ls' ...

Errors 1000 - 1999
Cannot create %S_MSG on view '%.*ls' because the view is not schema bound. 1940. 16 ... ls' is non-deterministic because it is dependent on the operating system. ...

Errors 10000 - 10999
Cannot create %S_MSG on view "%.*ls" because it uses the OPENXML rowset provider. ... ls' on view '%.*ls' because the view is dependent on base table '%.*ls' whose ...

Errors 15000 - 15999
Cannot %S_MSG the %S_MSG '%.*ls', because it does not exist or ... owner of Assembly '%.*ls' since dependent assembly '%.*ls' is not owned by the new owner. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5073, Severity 16

Sql Error Number:5073
Severity: 16

Description: Cannot alter collation for database '%ls' because it is READONLY, OFFLINE, or marked SUSPECT.

Possibly related links:

Errors 5000 - 5999
Cannot alter collation for database '%ls' because it is READONLY, OFFLINE, or marked SUSPECT. ... Cannot take '%.*ls' offline because the database is in use. 5162. 16 ...

Errors 1 - 999
Database '%.*ls' cannot be opened because it is offline. 943. 14. No ... Warning: Database "%.*ls" was marked suspect because of actions taken during upgrade. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5072, Severity 16

Sql Error Number:5072
Severity: 16

Description: ALTER DATABASE failed. The default collation of database '%.*ls' cannot be set to %.*ls.

Possibly related links:

Errors 5000 - 5999
ALTER DATABASE failed because a lock could not be placed on database '%.*ls' ... The default collation of database '%.*ls' cannot be set to %.*ls. 5073. 16 ...

Errors 1000 - 1999
The default collation of database '%.*ls' cannot be set to '%.*ls'. 1807. 17 ... ls' is the wrong type of device for CREATE DATABASE or ALTER DATABASE. Check ...

Errors 1000 - 1999
The default collation of database '%.*ls' cannot be set to '%.*ls'. 1807. 17 ... ls' is the wrong type of device for CREATE DATABASE or ALTER DATABASE. Check ...

Errors 4000 - 4999
Cannot open either database requested in login (%.*ls) or user default database. ... The log in this backup set begins at LSN %.*ls, which is too late to apply ...

Errors 15000 - 15999
Cannot set the default language to a language ID not ... Full-text catalog '%ls' cannot be populated because the database is in single-user access mode. ...

Errors 15000 - 15999
Cannot set the default language to a language ID not ... Full-text catalog '%ls' cannot be populated because the database is in single-user access mode. ...

Errors 2000 - 2999
Cannot alter trigger '%.*ls' for table '%.*ls' because this trigger does ... Database '%.*ls' must be set to single user mode before executing this statement. ...

Creating Merge Replication Custom Conflict Resolvers Using Visual Basic
... is set to TRUE, a conflict is logged only if the database that has ... Cannot insert duplicate key in object '%.*ls'. REPOLEExtErrorDupUniqueIndex. 0x00000002 ...

Creating Merge Replication Custom Conflict Resolvers Using Visual Basic
... is set to TRUE, a conflict is logged only if the database that has ... Cannot insert duplicate key in object '%.*ls'. REPOLEExtErrorDupUniqueIndex. 0x00000002 ...

Errors 1000 - 1999
The ALTER DATABASE command failed because the worker thread cannot be ... The default collation of database '%.*ls' cannot be set to '%.*ls'. 1807. 17. No ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5071, Severity 16

Sql Error Number:5071
Severity: 16

Description: Rebuild log can only specify one file.

Possibly related links:

Errors 5000 - 5999
Could not rebuild the log. 5025. 16. The file '%ls' already exists. ... At least one property per file must be specified. 5039. 16. MODIFY FILE failed. ...

MSBuild Command Line Reference
MSBuild.exe builds the specified project or solution file, with the specified options. ... Logs the build output to multiple log files, one log file per MSBuild node. ...

How to: Install SQL Server 2005 from the Command Prompt
... including error messages, are written to Setup log files. ... If SECURITYMODE=SQL is not specified, then Windows Authentication only is used. Important: ...

SQL Server 2000 (64-bit) Setup Command
The password string specified by this property is hidden and not written to the log file. ... Only one address per network adaptor is permitted, although this ...

How to: Move Your Team Foundation Server from One Hardware ...
This type of move is not only the most common but also one of the mo ... the Specify Backup dialog box, specify the location of the backup file, and then ...

How to: Rebuild the Team System Cube
... can also check the setupwarehouse.log file (available only if you specified it ... the cube according to a preset refresh frequency (by default, one hour) ...

SQL Server 2000 Recovery Models Give You Backup-and-Restore Flexibility
If your log file is available after the failure, you can restore up to the last ... You can restore only to the last log backup made before the failure. ...

How to: Restore Files and Filegroups (Transact-SQL)
... the files and filegroups must be the only person ... transaction log backup to apply after the current one; otherwise, specify the RECOVERY clause. ...

Error Messages A-Z
A table in multiple relationships can only have one child order. 1640 ... Rebuild library (Error 1711) Application file "file" is not closed (Error 1178) ...

RESTORE (Transact-SQL)
In addition, RESTORE can restore full-text files only, as well as with ... statement causes the data and log file to be restored to the specified locations. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5070, Severity 16

Sql Error Number:5070
Severity: 16

Description: Database state cannot be changed while other users are using the database '%.*ls'

Possibly related links:

Errors 5000 - 5999
Changes to the state or options of database '%.*ls' cannot be made at this time. ... Database state cannot be changed while other users are using the database '%.*ls' ...

Creating Merge Replication Custom Conflict Resolvers Using Visual Basic
... from the Publisher, due to a change from some other Subscriber. ... this session, while a value of 1 indicates TRUE, the database was created this session. ...

Creating Merge Replication Custom Conflict Resolvers Using Visual Basic
... from the Publisher, due to a change from some other Subscriber. ... this session, while a value of 1 indicates TRUE, the database was created this session. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... third parties in which the isolation level cannot be changed) as it is likely ... The datacenter can manage the state of snapshot isolation while the database is ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... third parties in which the isolation level cannot be changed) as it is likely ... The datacenter can manage the state of snapshot isolation while the database is ...

Errors 3000 - 3999
Cannot restore any database other than master when the server is in single user mode. ... the statement using the WITH REPLACE option to overwrite the '%ls' ...

Errors 8000 - 8999
The current user is not the database or object owner of table '%.*ls' ... Cannot add identity column, using the SELECT INTO statement, to table '%.*ls' ...

Errors 7000 - 7999
The OLE DB provider '%ls' reported a schema version for table '%ls' ... Cannot shrink file '%d' in database '%.*ls' to %d pages as it only contains %d pages. ...

Easy Async: Build Concurrent Apps From Simple F# Expressions
... you can execute other operations while the countdown is ... please see the End Bracket column in this issue at msdn.microsoft.com/magazine/cc872850.aspx. ...

Errors 15000 - 15999
One or more users are using the database. The requested operation cannot be completed. ... An error occurred while decrypting %S_MSG '%.*ls' that was encrypted ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5069, Severity 16

Sql Error Number:5069
Severity: 16

Description: ALTER DATABASE statement failed.

Possibly related links:

ALTER DATABASE (Transact-SQL)
The ALTER DATABASE statement must run in autocommit mode (the default ... When a database is in the RESTORING state, most ALTER DATABASE statements will fail. ...

Errors 5000 - 5999
This ALTER DATABASE statement is not supported. 5009. 16. ALTER DATABASE failed. Some disk names listed in the ... ALTER DATABASE statement failed. 5070. 16 ...

ALTER DATABASE (Transact-SQL)
The specified path must exist before executing the ALTER DATABASE statement. ... When a database is in the RESTORING state, most ALTER DATABASE statements will fail. ...

ALTER DATABASE Database Mirroring (Transact-SQL)
... set up by using the ALTER DATABASE statement instead of SQL Server Management ... Manually fail over to the database mirroring partner: ...

ALTER DATABASE SET Options (Transact-SQL)
... the database are set to READ ONLY, the database encryption operation will fail. ... timeframe specified by the termination clause of the ALTER DATABASE statement. ...

ALTER DATABASE Compatibility Level (Transact-SQL)
... with the specified version of SQL Server. New in SQL Server 2008, the following ALTER DATABASE syntax replaces the ... causes the statement to fail. ...

ALTER DATABASE
... several ALTER DATABASE database MODIFY FILE statements can be ... exist in the database, the ALTER DATABASE database COLLATE statement will fail. ...

ALTER DATABASE File and Filegroup Options (Transact-SQL)
For other ALTER DATABASE options, see ALTER DATABASE (Transact... any try to access the filegroup by an SQL statement will fail with an error. ...

MSSQLSERVER_1457
... ALTER DATABASE ... ALTER DATABASE database_name SET PARTNER OFF statement ... mirror database when mirroring is still enabled only after a failed SET ...

Troubleshooting Database Mirroring Deployment
... file operation might fail on the mirror database and cause mirroring to be suspended. ... The second ALTER DATABASE statement must be run on the principal server. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5068, Severity 10

Sql Error Number:5068
Severity: 10

Description: Failed to restart the current database. The current database is switched to master.

Possibly related links:

Errors 5000 - 5999
The master and model databases cannot have files added to them. ALTER ... Failed to restart the current database. The current database is switched to master. ...

Microsoft SQL Server 7.0 Performance Tuning Guide
... RAID controllers provide the ability to do this failed drive replacement and ... The master database is normally used just for adding new logins, databases, ...

Microsoft SQL Server 7.0 Performance Tuning Guide
... RAID controllers provide the ability to do this failed drive replacement and ... The master database is normally used just for adding new logins, databases, ...

Errors 3000 - 3999
There is no interrupted backup or restore operation to restart. ... The master database failed to restore. Use the rebuildm utility to rebuild the master database. ...

Error and Event Messages in Team Foundation
TF15026: The application tier failed to respond to the request in a timely manner. ... TF26160: The Team Foundation Server work item database is in read-only mode. ...

Errors 7000 - 7999
The OLE DB provider '%ls' supports column-level collation, but failed to provide ... Full-Text Search is not enabled for the current database. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... while the database is online; there is no need to restart the database to pick ... The master database is always enabled for snapshot isolation. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... while the database is online; there is no need to restart the database to pick ... The master database is always enabled for snapshot isolation. ...

Embedding SQL Server Express into Custom Applications
... SQL Server databases, including master, the resource database, and tempdb. ... connected to Express, check the database versions switch (CheckVersion()) { case ...

Chapter 17 - Tuning .NET Application Performance
Reserving space in this manner allows the master file table to grow optimally. ... documentation at http://msdn.microsoft.com/library/en-us/cpgenref/html ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5067, Severity 16

Sql Error Number:5067
Severity: 16

Description: The database option TORN_PAGE_DETECTION is incompatible with the PAGE_CHECKSUM option.

Possibly related links:
There are no links yet!

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5066, Severity 16

Sql Error Number:5066
Severity: 16

Description: Database options single user and dbo use only cannot be set at the same time.

Possibly related links:

Errors 5000 - 5999
... to the state or options of database '%.*ls' cannot be made at this time. ... Database options single user and dbo use only cannot be set at the same time. 5068 ...

CREATE DATABASE
... the dbo use only database option turned on, and the status is set to loading. ... Fractions cannot be specified in the SIZE, MAXSIZE, and FILEGROWTH parameters. ...

CREATE DATABASE
... the dbo use only database option turned on, and the status is set to loading. ... Fractions cannot be specified in the SIZE, MAXSIZE, and FILEGROWTH parameters. ...

An Overview of Database Project Settings
... you cannot also set the check box to put the database in Single User mode during ... you specified as your design-time validation database will be used. ...

An Overview of Database Project Settings
... you cannot also select the check box to put the database in single-user mode during deployment. ... the post-build command line should be run always, only ...

CREATE ENDPOINT (Transact-SQL)
CLEAR and SSL can be specified at the same time. If only CLEAR is specified, the incoming requests must use HTTP. ... cannot be executed inside a user ...

CREATE FUNCTION (Transact-SQL)
User-defined functions cannot be used to perform actions that modify the database state. ... set of input values and with the same state of the database would ...

Delimited Identifiers (Database Engine)
... the QUOTED_IDENTIFIER option of ALTER DATABASE, or the user options option of ... If the SET QUOTED_IDENTIFIER option is not ON, the table and columns cannot be ...

XML Options in Microsoft SQL Server 2005
... formatting on the client side by allowing the user to set the ... Data that does not have a fixed schema cannot be modeled using a single relational table. ...

Using Integration Services with the Database Engine
The SIDs are required if you transfer a database at the same time; otherwise, ... example, only a SQL Server database includes schemas and user-defined aggregates. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5065, Severity 16

Sql Error Number:5065
Severity: 16

Description: The file "%ls" is currently being scanned or used by a background or user process. Try the operation again later.

Possibly related links:
There are no links yet!

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5064, Severity 16

Sql Error Number:5064
Severity: 16

Description: Changes to the state or options of database '%.*ls' cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.

Possibly related links:

Errors 5000 - 5999
Changes to the state or options of database '%.*ls' cannot be made at this time. The database is in single-user mode, and a user is currently connected to it. 5065 ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
In fact, changes made to the principal database automatically ... and to understand the state of the database and client requests at the time of the change. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
In fact, changes made to the principal database automatically ... and to understand the state of the database and client requests at the time of the change. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5063, Severity 16

Sql Error Number:5063
Severity: 16

Description: Database '%.*ls' is in warm standby. A warm-standby database is read-only.

Possibly related links:

Errors 5000 - 5999
... remove the file '%.*ls' because it is the only file in the DEFAULT ... Database '%.*ls' is in warm standby. A warm-standby database is read-only. 5064. 16 ...

Errors 3000 - 3999
Database '%ls' is in warm-standby state (set by executing RESTORE WITH STANDBY) ... Database '%.*ls' (database ID %d) was marked for standby or read-only use, but ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5062, Severity 16

Sql Error Number:5062
Severity: 16

Description: The option "%.*ls" conflicts with another requested option. The options cannot both be requested at the same time.

Possibly related links:

SQL Server 2005 Row Versioning-Based Transaction Isolation
... of the read, long-running conflicts cannot occur. ... In both cases, the option to enable row versioning-based isolation levels occurs at the database ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... of the read, long-running conflicts cannot occur. ... In both cases, the option to enable row versioning-based isolation levels occurs at the database ...

Errors 1000 - 1999
The CASCADE, WITH GRANT or AS options cannot be specified with statement permissions. ... with index DDL operation on %S_MSG '%.*ls' because it conflicts with another ...

Errors 1 - 999
The same large data placement option "%.*ls" has been specified twice. 153. 15. No ... The column name "%.*ls" specified in the %ls operator conflicts with the ...

Errors 8000 - 8999
Cannot find the requested trace template: id = %ls. 8353. 16. Yes ... Query cannot be compiled because USE PLAN hint conflicts with hint %ls. ...

Errors 7000 - 7999
The text, ntext, or image pointer value conflicts with the column name specified. ... OLE DB provider '%ls' cannot be used for distributed queries because the ...

Errors 20000 - 20999
Valid options are 'push', 'pull', or 'both'. 20081. 16. No ... Replication database option 'sync with backup' cannot be set on the publishing ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5061, Severity 16

Sql Error Number:5061
Severity: 16

Description: ALTER DATABASE failed because a lock could not be placed on database '%.*ls'. Try again later.

Possibly related links:

Errors 5000 - 5999
ALTER DATABASE failed. Database '%.*ls' was not created with ' ... ALTER DATABASE failed because a lock could not be placed on database '%.*ls'. Try again later. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... a transactionally consistent view of the database that can effectively lock out ... consistency and not the basis for later modifications, no application ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... a transactionally consistent view of the database that can effectively lock out ... consistency and not the basis for later modifications, no application ...

Errors 30000 - 34999
... ALTER/DROP DATABASE ENCRYPTION KEY failed because a lock could not be placed on database '%.*ls'. Try again later. 33117. 16. No ...

Errors 1000 - 1999
Could not allocate a new page for database '%.*ls' because of ... Could not obtain exclusive lock on database '%.*ls'. Retry the operation later. 1810 ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5060, Severity 10

Sql Error Number:5060
Severity: 10

Description: Nonqualified transactions are being rolled back. Estimated rollback completion: %d%%.

Possibly related links:

Errors 5000 - 5999
Nonqualified transactions are being rolled back. Estimated rollback completion: %d ... User connections are limited to %d. 5829. 16. The specified user options ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5059, Severity 16

Sql Error Number:5059
Severity: 16

Description: Database '%.*ls' is in transition. Try the ALTER DATABASE statement later.

Possibly related links:

Errors 5000 - 5999
ALTER DATABASE failed. Some disk names listed in the statement were not found. ... Database '%.*ls' is in transition. Try the ALTER DATABASE statement later. 5060. 10 ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... issues that occur in systems that try to support OLTP ... Statement-level snapshot is enabled by setting the READ_COMMITTED_SNAPSHOT database option to ON. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... issues that occur in systems that try to support OLTP ... Statement-level snapshot is enabled by setting the READ_COMMITTED_SNAPSHOT database option to ON. ...

Errors 1 - 999
Unknown object type '%.*ls' used in a CREATE, DROP, or ALTER statement. 344. 16. No ... Database '%.*ls' is in transition. Try the statement later. 954. 14. No ...

Errors 30000 - 34999
... resetting the owner of database '%.*ls' using the ALTER AUTHORIZATION statement. ... a lock could not be placed on database '%.*ls'. Try again later. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5058, Severity 16

Sql Error Number:5058
Severity: 16

Description: Option '%.*ls' cannot be set in database '%.*ls'.

Possibly related links:

Errors 5000 - 5999
Option '%.*ls' cannot be set in database '%.*ls'. 5059. 16. Database '%.*ls' is in transition. ... Database options single user and dbo use only cannot be set ...

Errors 3000 - 3999
The backup set in file '%ls' was created by %hs and cannot be used for this restore operation. ... the WITH REPLACE option to overwrite the '%ls' database. ...

Errors 8000 - 8999
Table '%.*ls' does not exist or cannot be opened for SET operation. 8104. 16 ... for row ID %.*hs was not found in index ID %d, of table %d, in database '%.*ls' ...

Errors 2000 - 2999
Cannot %s trigger '%.*ls' for view '%.*ls' because it is defined with the ... Database '%.*ls' must be set to single user mode before executing this statement. ...

Errors 4000 - 4999
The log in this backup set begins at LSN %.*ls, which is too late to apply to the database. ... The log in this backup set cannot be applied because it is on a ...

Errors 1000 - 1999
Cannot set or reset the %ls option within a procedure. 1060. 15 ... The default collation of database '%.*ls' cannot be set to '%.*ls'. 1807. 17 ...

Errors 1000 - 1999
Cannot set or reset the %ls option within a procedure. 1060. 15 ... The default collation of database '%.*ls' cannot be set to '%.*ls'. 1807. 17 ...

Errors 1 - 999
Cannot use the OUTPUT option in a DECLARE statement. 182. 15 ... ls' is supported on Unicode data types only and cannot be set at the database or ...

Errors 7000 - 7999
... cannot use a text pointer for a table with option 'text in row' set ... Use sp_dboption to set the 'select into/bulkcopy' option on for database '%.*ls'. 7133 ...

Errors 15000 - 15999
Remote login option does not exist or cannot be set by user. ... Full-text catalog '%ls' cannot be populated because the database is in single-user access mode. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5057, Severity 16

Sql Error Number:5057
Severity: 16

Description: Cannot add, remove, or modify file '%.*ls' because it is offline.

Possibly related links:

Errors 5000 - 5999
Cannot add, remove, or modify a file in filegroup '%.*ls' because the filegroup ... Cannot add, remove, or modify file '%.*ls' because it is offline. 5058. 16 ...

Errors 21000 -21999
Cannot add login '%s' to the publication access list because it does not have ... Could not open distribution database %s because it is offline or being recovered. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... of replication-specific stored procedures to add or remove columns from tables. ... on the other hand, is truly optimistic because data that is to be modified ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... of replication-specific stored procedures to add or remove columns from tables. ... on the other hand, is truly optimistic because data that is to be modified ...

Errors 4000 - 4999
BACKUP LOG cannot modify the database because the database ... Cannot alter column '%.*ls' in table '%.*ls' to add or remove the FILESTREAM column attribute. ...

Errors 1000 - 1999
Remove the FILESTREAM_ON clause from the statement, or add a FILESTREAM column ... The SQL statement cannot be executed because filegroup '%.*ls' is offline. ...

Errors 30000 - 34999
Cannot add %S_MSG '%.*ls' because there is already %S_MSG specified for the login. ... scan for database '%.*ls' cannot complete since one or more files are offline. ...

Errors 11000 - 11999
... could not be delivered because it is out of sequence ... Cannot modify the column '%.*ls' in the table '%.*ls' to add or remove the COLUMN_SET attribute. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5056, Severity 16

Sql Error Number:5056
Severity: 16

Description: Cannot add, remove, or modify a file in filegroup '%.*ls' because the filegroup is offline.

Possibly related links:

Errors 5000 - 5999
Cannot add, remove, or modify a file in filegroup '%.*ls' because the filegroup is offline. ... Cannot add, remove, or modify file '%.*ls' because it is ...

Errors 1000 - 1999
A filegroup cannot be added using ALTER DATABASE ADD FILE. Use ALTER DATABASE ... The SQL statement cannot be executed because filegroup '%.*ls' is offline. ...

Errors 4000 - 4999
... of its indexes resides on an offline filegroup '%.*ls' ... Cannot alter column '%.*ls' in table '%.*ls' to add or remove the FILESTREAM column attribute. ...

Errors 30000 - 34999
Cannot add %S_MSG '%.*ls' because there is already %S_MSG specified for the login. ... Cannot modify filegroup read-only/read-write state while an encryption ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5055, Severity 16

Sql Error Number:5055
Severity: 16

Description: Cannot add, remove, or modify file '%.*ls'. The file is read-only.

Possibly related links:

Errors 5000 - 5999
Cannot add, remove, or modify files in filegroup '%.*ls'. The filegroup is read-only. ... Cannot add, remove, or modify file '%.*ls'. The file is read-only. 5056. 16 ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... stored procedures to add or remove columns from tables. ... users cannot modify the data that has been read and cannot insert new rows into the set. ...

Errors 4000 - 4999
BACKUP LOG cannot modify the database because database is read-only. ... File '%ls' was only partially restored by a database or file restore. ...

SQL Server 2005 Row Versioning-Based Transaction Isolation
... stored procedures to add or remove columns from tables. ... users cannot modify the data that has been read and cannot insert new rows into the set. ...

Appendix B: Windows Behavior
... both the non-domain controller configuration and the read-only domain controller ... System Secret: Cannot be accessed by any clients. ...

Appendix B: Windows Behavior
... both the non-domain controller configuration and the read-only domain controller ... System Secret: Cannot be accessed by any clients. ...

Errors 4000 - 4999
BACKUP LOG cannot modify the database because the database is read-only. ... Cannot alter column '%.*ls' in table '%.*ls' to add or remove the FILESTREAM ...

Errors 6000 - 6999
Mutators cannot be used in the read-only portion of the query. 6201. 16. No ... ALTER ASSEMBLY ADD FILE failed because the file, "%.*ls", being added is empty. 6218 ...

Errors 1000 - 1999
... mirroring cannot be enabled because the "%.*ls" database is read-only on one of the partners. ... Remove the FILESTREAM_ON clause from the statement, or ...

Errors 30000 - 34999
... or asymmetric key from the file %.*ls. ErrorCode: 0x%x. ... Cannot enable or modify database encryption on a database that is read-only, has read-only files ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5054, Severity 16

Sql Error Number:5054
Severity: 16

Description: Could not cleanup worktable IAM chains to allow shrink or remove file operation. Please try again when tempdb is idle.

Possibly related links:

Errors 5000 - 5999
Could not cleanup worktable IAM chains to allow shrink or remove file operation. Please try again when tempdb is idle. 5055. 16. Cannot add, remove, or modify ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5052, Severity 16

Sql Error Number:5052
Severity: 16

Description: %ls is not permitted while a database is in the %ls state.

Possibly related links:

Cause and Resolution of Database Engine Errors
Could not allocate space for object '%.*ls'%.*ls in database '%.*ls' because the ' ... This is not permitted at level LEVEL of the B-tree. MSSQLSERVER_2576 ...

Errors 2000 - 2999
Could not find a table or object name '%.*ls' in database '%.*ls'. 2511. 16 ... This is not permitted at level %d of the B-tree. 2575. 16 ...

Errors 8000 - 8999
The current user is not the database or object owner of table '%.*ls' ... Constraint name '%.*ls' not permitted. Constraint names cannot begin with a number sign ...

Errors 1 - 999
The name '%.*ls' is not permitted in this context. ... To change the %ls, the database must be in state in which a checkpoint can be executed. ...

Errors 6000 - 6999
The distributed transaction associated with UOW %s is not in PREPARED state. ... Could not find type ID %d in database %.*ls. This is due to a schema inconsistency. ...

Errors 9000 - 9999
The log scan number %S_LSN passed to log scan in database '%.*ls' is not valid. ... occurred while processing a message in the Service Broker and Database Mirroring ...

Errors 1000 - 1999
... copy of database "%.*ls" because the database is not in a recovering state. ... been overwritten while being reverted to online state from a database snapshot. ...

Errors 15000 - 15999
The current database does not contain a %s named '%ls'. 15326. 10. No ... is already in use as a %s name and would cause a duplicate that is not permitted. ...

Errors 1 - 999
The name "%.*s" is not permitted in this context. ... To change the %ls, the database must be in state in which a checkpoint can be executed. ...

Errors 8000 - 8999
The conversation endpoint is not in a valid state for SEND. The current endpoint state is '%ls' ... Database '%.*ls', specified in the USE PLAN hint, does not ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5051, Severity 16

Sql Error Number:5051
Severity: 16

Description: Cannot have a filegroup with the name 'DEFAULT'.

Possibly related links:

Errors 5000 - 5999
The name of the primary filegroup cannot be ... file '%.*ls' because it is the only file in the DEFAULT filegroup. ... Cannot have a filegroup with the name ' ...

CREATE TABLE (Transact-SQL)
... { partition_scheme_name | filegroup | "default" } ] [ WITH ... names must follow the rules for identifiers, except that the name cannot start with a number ...

Default Property (FileGroup)
... FALSE, the referenced filegroup is not used as the default in table ... The filegroup can be specified by name to direct creation. Applies To: FileGroup Object ...

Default Property (FileGroup)
... FALSE, the referenced filegroup is not used as the default in table ... The filegroup can be specified by name to direct creation. Applies To: FileGroup Object ...

Default Property (FileGroup)
... FALSE, the referenced filegroup is not used as the default in table ... The filegroup can be specified by name to direct creation. Applies To: FileGroup Object ...

Default Property (FileGroup)
... FALSE, the referenced filegroup is not used as the default in table ... The filegroup can be specified by name to direct creation. Applies To: FileGroup Object ...

CREATE TABLE (Transact-SQL)
ON { | filegroup | "default" ... names must follow the rules for identifiers, except that the name cannot start with a number ...

ALTER DATABASE File and Filegroup Options (Transact-SQL)
SIZE, MAXSIZE, and FILEGROWTH parameters cannot be set when a UNC path is ... filegroup the default filegroup for the database, or changing the filegroup name. ...

ALTER DATABASE
The primary filegroup cannot be made read-only. ... users who have exclusive access to the database can mark a filegroup read/write. DEFAULT ...

ALTER DATABASE
The primary filegroup cannot be made read-only. ... users who have exclusive access to the database can mark a filegroup read/write. DEFAULT ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5050, Severity 16

Sql Error Number:5050
Severity: 16

Description: Cannot change the properties of empty filegroup '%.*ls'. The filegroup must contain at least one file.

Possibly related links:

Errors 5000 - 5999
At least one property per file must be ... Cannot change the properties of empty filegroup '%.*ls'. The filegroup must contain at least one file. 5051. 16 ...

Errors 1000 - 1999
... mirroring cannot be enabled because the "%.*ls" database is read ... The primary file must be at least %d MB to accommodate a copy of the model database. ...

Errors 30000 - 34999
... stoplist '%.*ls' cannot be dropped because it is being used by at least one full ... the full-text index, re-attach the database, change the read-only ...

Errors 7000 - 7999
One or more properties could not be set on the query for OLE DB provider "%ls" ... text change tracking must be started on table or indexed view '%.*ls' before the ...

Errors 9000 - 9999
Variable names must start with the '@' symbol followed by at least one character. ... The %s of route '%.*ls' cannot be empty. 9660. 16. No ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5048, Severity 16

Sql Error Number:5048
Severity: 16

Description: Cannot add, remove, or modify files in filegroup '%.*ls'. The filegroup is read-only.

Possibly related links:

Errors 5000 - 5999
Cannot add, remove, or modify files in filegroup '%.*ls'. The filegroup is read-only. ... Cannot add, remove, or modify file '%.*ls'. The file is read-only. 5056. 16 ...

Errors 4000 - 4999
BACKUP LOG cannot modify the database because database is read-only. ... Cannot add columns to %S_MSG '%.*ls' because it is being published for merge replication. ...

Errors 1000 - 1999
... mirroring cannot be enabled because the "%.*ls" database is read-only on one of the partners. ... Cannot add FILESTREAM filegroup or partition scheme since ...

Errors 30000 - 34999
Cannot add %S_MSG '%.*ls' because there is already %S_MSG ... Cannot modify filegroup read-only/read-write state while an encryption transition is in progress. ...

Errors 4000 - 4999
... cannot modify the database because the database is read-only. ... Cannot alter column '%.*ls' in table '%.*ls' to add or remove the FILESTREAM column attribute. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5047, Severity 16

Sql Error Number:5047
Severity: 16

Description: Cannot change the READONLY property of the PRIMARY filegroup.

Possibly related links:

Errors 5000 - 5999
Cannot change the READONLY property of the PRIMARY filegroup. 5048. 16 ... Cannot change the properties of empty filegroup '%.*ls' ...

Backing Up Read-Only Databases
You cannot change the IsReadOnly property of a filegroup during a backup. ... A partial backup of a read-only database contains only the primary filegroup. ...

ALTER DATABASE File and Filegroup Options (Transact-SQL)
Sets the read-only or read/write property to the filegroup. DEFAULT ... The primary filegroup cannot be made read-only. ... Change the location of each file by ...

Error Constants (SQLDMO_ERROR_TYPE)
You cannot change the type of an existing merge article. SQLDMO_E_REGERROR. 0x5066 ... Occurs when the Name property of the FileGroup object is PRIMARY. ...

Error Constants (SQLDMO_ERROR_TYPE)
You cannot change the type of an existing merge article. SQLDMO_E_REGERROR. 0x5066 ... Occurs when the Name property of the FileGroup object is PRIMARY. ...

CREATE DATABASE (Transact-SQL)
... read-only database, the log cannot be rebuilt because the ... Controls the filegroup properties. Filegroup cannot be specified on a database snapshot. ...

ALTER DATABASE (Transact-SQL)
... read-only or read/write property to the filegroup. ... The primary filegroup cannot be ... You cannot change the state of ALLOW_SNAPSHOT_ISOLATION if the ...

ALTER DATABASE
The primary filegroup cannot be made read-only. ... Reverses the READONLY property. Updates are enabled for the objects in the filegroup. ...

ALTER DATABASE
The primary filegroup cannot be made read-only. ... Reverses the READONLY property. Updates are enabled for the objects in the filegroup. ...

CREATE FUNCTION (Transact-SQL)
User-defined functions cannot be used to perform actions that modify the database state. ... The table is always put in the primary filegroup. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5046, Severity 10

Sql Error Number:5046
Severity: 10

Description: The %S_MSG property '%ls' has been set.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' has been removed. 5045. 16. The %S_MSG already has the '%ls' property set. ... The %S_MSG property '%ls' has been set. 5047. 16 ...

Errors 4000 - 4999
The log in this backup set begins at LSN %.*ls, which is too late to ... The bulk data source provider string has an unsupported property name (%ls). 4845 ...

Errors 2000 - 2999
SET DATEFIRST %d is out of range. 2743. 16 %ls statement requires %S_MSG parameter. 2744. 16 ... The ROWGUIDCOL property can only be specified on the ...

Errors 11000 - 11999
... ls' does not have the same column set property in tables '%.*ls' and '%.*ls' ... Cannot %S_MSG table '%.*ls' because the table either contains sparse columns or ...

Errors 10000 - 10999
Cannot create %S_MSG on the view '%.*ls' because it references a sparse column set. ... for a CLR table-valued function must set the FillRowMethodName property. ...

Errors 1000 - 1999
The %S_MSG '%.*ls' is out of the range for numeric representation (maximum ... The remote server instance has a more recent value for the property '%.*ls' ...

Errors 25000 - 25999
The %S_MSG, "%.*ls", could not be added. The maximum number of packages has been reached. ... The event session option, "%.*ls", is set more than once. ...

Errors 6000 - 6999
ls.%.*ls.%.*ls: The SqlFacetAttribute property IsFixedLength cannot be set to ... Specified collection '%.*ls' cannot be dropped because it is used by %S_MSG '%ls' ...

Errors 1 - 999
ls is not a valid function, property, or field. 228. 15. No ... The column name '%.*ls' is specified more than once in the SET clause. ...

Errors 30000 - 34999
Cryptographic provider %S_MSG '%ls' in dll is different from the guid recorded ... S_MSG property of the key returned by EKM provider doesn't match the expected value ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5045, Severity 16

Sql Error Number:5045
Severity: 16

Description: The %S_MSG already has the '%ls' property set.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' has been removed. 5045. 16. The %S_MSG already has the '%ls' property set. ... The %S_MSG property '%ls' has been set. 5047. 16 ...

Errors 2000 - 2999
... table '%.*ls' already has one, the column '%.*ls' cannot be ... SET DATEFIRST %d is out of range. 2743. 16 %ls statement requires %S_MSG parameter. 2744. 16 ...

Errors 4000 - 4999
The log in this backup set begins at LSN %.*ls, which is too late to ... failed because a column already exists in table '%.*ls' with ROWGUIDCOL property. ...

Errors 10000 - 10999
A deletion is pending or has already been transmitted to the data ... Cannot create %S_MSG on the view '%.*ls' because it references a sparse column set. ...

Errors 15000 - 15999
Cannot set application role '%.*ls' because it does not exist or the password is ... The %S_MSG with name "%.*ls" already exists. 15531. 16. No ...

Errors 25000 - 25999
The event session option, "%.*ls", is set more than once. ... The event session has already been started. 25706. 16. No. The %S_MSG, "%.*ls", could not be found. ...

Errors 6000 - 6999
... MVID, identical to an assembly that is already registered under the name "%.*ls" ... ls.%.*ls.%.*ls: The SqlFacetAttribute property IsFixedLength cannot be set to ...

Errors 8000 - 8999
... ls', which already has column '%.*ls' that inherits the identity property. ... Reason: %S_MSG. Try removing the index hints or removing SET FORCEPLAN. 8636 ...

Errors 30000 - 34999
Cannot add %S_MSG '%.*ls' because there is already %S_MSG specified for the login. ... S_MSG property of the key returned by EKM provider doesn't match the ...

Errors 1000 - 1999
The remote server instance has a more recent value for the property '%.*ls' ... the sparse column set '%.*ls' in the table '%.*ls' because the table already ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5044, Severity 10

Sql Error Number:5044
Severity: 10

Description: The %S_MSG '%.*ls' has been removed.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' has been removed. 5045. 16. The %S_MSG already has the '%ls' property set. ... The %S_MSG property '%ls' has been set. 5047. 16 ...

Errors 3000 - 3999
File '%ls' of database '%ls' has been removed or shrunk since this backup or ... Cannot detach the %S_MSG '%.*ls' because it is currently in use. 3704. 16 ...

Errors and Events Reference (Replication)
Cannot alter the %S_MSG '%.*ls' because it is being published for replication. MSSQL_ENG007395. ... The subscription created by Subscriber '%s' to publication ' ...

Errors and Events Reference (Replication)
Cannot alter the %S_MSG '%.*ls' because it is being published for replication. MSSQL_ENG007395. ... The subscription created by Subscriber '%s' to publication ' ...

Errors 7000 - 7999
The %S_MSG '%.*ls' specified for the clustered index '%.*ls' was used for table ' ... Mirroring must be removed from the database for this DBCC command. 7931. 16. No ...

Errors 30000 - 34999
The crawl needs to be restarted after this condition is removed. 30099. 17. No ... Cryptographic provider %S_MSG '%ls' in dll is different from the guid recorded ...

Errors 9000 - 9999
The %S_MSG name '%.*ls' contains more than the maximum number of ... Messages with conversation ID '%ls' have been removed from the transmission queue. ...

Errors 8000 - 8999
... ls" on the target table of INSERT is deprecated because it may be removed in ... Reason: %S_MSG. Try removing the index hints or removing SET FORCEPLAN. ...

Errors 15000 - 15999
... owned by a member of the sysadmin role before it can be removed. ... An error occurred while decrypting %S_MSG '%.*ls' that was encrypted by the old master key. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!

Sql Error #5043, Severity 16

Sql Error Number:5043
Severity: 16

Description: The %S_MSG '%.*ls' cannot be found in %ls.

Possibly related links:

Errors 5000 - 5999
The %S_MSG '%.*ls' cannot be removed because it is not empty. 5043. 16. The %S_MSG '%.*ls' cannot be found in %ls. 5044. 10. The %S_MSG '%.*ls' has been removed. ...

Errors 4000 - 4999
... ls' is not updatable because a partitioning column was not found. ... Cannot alter the %S_MSG '%.*ls' because it is being published for replication. 4930 ...

Errors 2000 - 2999
Cannot %s trigger '%.*ls' for %S_MSG '%.*ls' because an INSTEAD OF %s trigger already exists. ... Minimally logged extents were found in GAM interval starting ...

Errors 1 - 999
The %S_MSG '%.*ls' is out of the range of computer representation (%d ... Object '%.*ls' cannot be found. 268. 16. Cannot run SELECT INTO in this database. ...

Errors 3000 - 3999
Cannot detach the %S_MSG '%.*ls' because it is currently in use. 3704. 16 ... index '%.*ls' because the table or clustered index entry cannot be found in the ...

Errors 7000 - 7999
... catalog in directory '%ls' for clustered server cannot be ... Cannot use a full-text predicate on %S_MSG '%.*ls' because it is not located on the local server. ...

Errors 1000 - 1999
... Map-Element type (%d) was found in the server-wide default sort ... Index %S_MSG cannot be created on view '%.*ls' because the view is not schema bound. ...

Errors 1000 - 1999
... Map-Element type (%d) was found in the server-wide default sort ... Index %S_MSG cannot be created on view '%.*ls' because the view is not schema bound. ...

Errors and Events Reference (Replication)
Cannot alter the %S_MSG '%.*ls' because it is being published for replication. MSSQL_ENG007395. ... The row was not found at the Subscriber when applying the ...

Cause and Resolution of Database Engine Errors
The server network address "%.*ls" can not be reached or does ... The %S_MSG protocol transport cannot listen on port %d because it is in use by another process. ...

User suggestions:
There are no user suggestions approved yet. Use the comments section to be the first!